!
!
Intelli-M eIDC

Intelli-M card access by Infinias, made in

IP, PoE easy to install and use door controllers. Door controller S-eIDC32, economically priced, using existing Ethernet wiring provide answer to card access needs.

Introducing Intelli-M IP, PoE, Infinias latest networked access control system. Intelli-M IP, PoE takes advantage of connection ot existing Ethernet installations in order to carry both power and data to the door controller. Very small in size and big in capabilities allows quick installations using a standard electrical double gang box. Using the mounting plate provided, the eIDC snaps into two different positions for easy wiring. Maintenance and diagnostics are incredibly fast and simple using the light configuration on the front of the unit, saving users time and money. 

 

THIS IS YOUR NEW CARD ACCESS SYSTEM - PRETTY MUCH ALL OF IT! SEE BELOW

Intelli-M's eIDC contains an embedded Web server. For stand-alone applications requiring only one door of access control, the embedded Web server allows users to easily connect and manage their single door system from anywhere in the world using most common Web browser software via the Internet. For projects that require multiple doors, the Web server can be used during system commissioning, significantly reducing the set-up time required to program the system.

!

S-EIDC32

S-eIDC32
Weight: kg

S-eIDC IP, PoE door access controller

Single door access controller, in and out. Just add card reader and door lock and card access system is complete. See available kits below.

 

EIDC-KIT1

EIDC-KIT1
Weight: kg

eIDC32 kit, PoE based

Contents: S-eIDC controller (1), R10 or ProPoint Plus RFID reader (1), proximity cards (10), S-SMB-5075 backbox, 946RM2G reader wire (15ft, 5m)

EIDC-KIT2

EIDC-KIT2
Weight: kg
eIDC32 kit, PoE based with software
Contents: S-eIDC controller (1), R10 or ProPoint Plus RFID reader (1), proximity cards (10), S-SMB-5075 backbox, 946RM2G reader wire (15ft, 5m), S-BASE-KIT software (1)

EIDC-KIT3

EIDC-KIT3
Weight: kg
eIDC32 kit with power supply
Contents: S-eIDC controller (1), R10 or ProPoint Plus RFID reader (1), proximity cards (10), S-SMB-5075 backbox, 946RM2G reader wire (15ft, 5m), 24VDC 1A power supply (1)

EIDC-KIT4

EIDC-KIT4
Weight: kg
eIDC32 kit with power supply and software
Contents: S-eIDC controller (1), R10 or ProPoint Plus RFID reader (1), proximity cards (10), S-SMB-5075 backbox, 946RM2G reader wire (15ft, 5m), 24VDC 1A power supply (1), S-BASE-KIT software (1)

S-BASE-KIT

S-BASE-KIT
Weight: kg
S-BASE-KIT is software package for S-eIDC
This software can control up to 32 S-eIDC32 controllers in one system. For bigger systems add another license.

S-SMB-5075

S-SMB-5075
Weight: kg
S-SMB-5075 surface mounting box
Backbox for eIDC32. Surface mount.

S-RMB-5070

S-RMB-5070
Weight: kg
S-RMB-5070 is recessed box
This is recessed mounting box for eIDC32 door controllers

PAS-3522

PAS-3522
Weight: kg
PAS-3522 power supply module
Power supply 24VDC 2A, same or similar to shown. Powers up eIDC32 and accessories in lack of PoE solution

946RM2G

946RM2G
Weight: kg
Reader wire, overall shield
Wire for readers. 6 conductors, AWG 22, shielded. Price shown per foot (0.305cm)

eIDC32 CONNECTIONS

Typical S-eIDC32 connections

This diagram shows all possible wiring connections and accessories for Intelli-M door controller:

Intelli-M Features

There are many benefits in eIDC solution, here are some:

  • It is smallest fully featured card access controller on the market. 1.7x2.82x1.3 INCH (WxHxD)
  • It is one of the most economical "out of the box" one door controllers on the market!
  • It fits standard double gang electrical box.
  • It is Ethernet enabled.
  • It is PoE enabled (Power over Ethernet).
  • It will power up readers, door lock and other peripherals. 12VDC 1A available.
  • It has WEB interface embedded, no extra software required.
  • It has DHCP server built-in. No problems with IP addresses.
  • When powered up it actually shows you selected IP address using on board LED's.
  • It will control one door in and out.
  • It will continue working in peer to peer configuration if server goes down.
  • Buy it in kit or in pieces. Typical kits below.
  • Add reader and door strike and that is all for working system. Can't be simpler then that!
  • Supports local data base of 2000 cards holders (WEB mode), 5000 with software
  • Supports 16000 local event buffering.
  • Perfect for one door or few doors systems. If you want to go big, there is no limit to number of IDC controllers used.
  • Perfect for elevator control.
  • For complete control use Infinias Access software.
  • Uses standard HID proximity cards and readers
  • For higher security use iCLASS proprietary proximity smart card readers and cards. They cost less then you expected.
  • Get printable smart cards.
  • Easy to use and inexpensive smart card/keypad readers.
  • It is easy to add another door, you are not limited to usual 2 or 4 door controllers.
  • It is really easy to program and use using your standard WEB browser.
  • It has built-in control buzzer.
  • It has 3 ways to power it up: PoE, power injector module or standard power 24VDC
  • ...more

 

ACCESS KITS MAIN PARTS:

eIDC IP PoE door controller HID iCLASS reader HID iCLASS clamshell cards Infinias Access software Intelli-M enclosure, recessed shown
eIDC DOOR CONTROLLER CARD READER SMART CARDS ACCESS SOFTWARE BACKBOX

S-eIDC32 BACK BOXES

2 types of boxes available

S-eIDC32 could be mounted into any kind of box, however factory provided 2 for typical installations. Surface mount and recessed mounted boxes: